Autodesk 057A1-09A111-1001 - AutoCAD LT 2009, User Manual, Page: 105 / 414

Share

Page: 105 / 414

Autodesk 057A1-09A111-1001 - AutoCAD LT 2009 User Manual Download Page 105

2

Respond to the prompts as shown:

Select foreground objects:

Continue clicking (1) until you see GRIPPER:2 (Front) in the tooltip

Select foreground objects:

Press

ENTER

3

In the message box that is displayed, click No, Use all objects selected.

4

In the message box that is displayed, select OK.

5

Click Level2 in the tree view and select the

button.

6

Respond to the prompts as shown:

Select objects:

Continue clicking (2) until you see AXIS:1 (Front) in the tooltip

Select objects:

Press

ENTER

7

In the tree view of the Create Hide Situations dialog box, click the Hide
node.

In the next step, you select where in the Mechanical Browser the hide
situation is stored. The most logical place to store the hide situation is
on the Front view of the ROBOT:1 assembly.

8

In the Store Hide Situation on list, select ROBOT:1 (Front).

9

Click OK. The Hide Situation is created and stored under ROBOT:1 (Front)
in the Mechanical Browser.

This is the end of the tutorial.

Using AMSHIDE in Assemblies | 97

«
...
103
104
105
106
107
...
»

Summary of Contents for 057A1-09A111-1001 - AutoCAD LT 2009































































































































































































































































































































































































































Reviews:

No comments