Autodesk 057A1-09A111-1001 - AutoCAD LT 2009 User Manual Download Page 170

Page: 170 / 414

Respond to the prompts as follows:

Select objects for background:

Select the square hollow section on the left

Select objects for background:

Select the square hollow section on the right

Select objects for background:

Press

ENTER

In the Modify Hide Situation dialog box, click Preview.

Your drawing looks like this:

Respond to the prompts:

Accept preview and exit command [Yes/No] <Yes>:

Press

ENTER

Edit the behind situation [modifY/Move/Restore/Genius12]

<Update>:

Press

ENTER

Select objects:

Press

ENTER

The 2D hide situation is corrected.

Save your file.

Copying and Moving 2D Hide Situations

If you copy or move assemblies that contain 2D hide situations, the 2D hide
information is not lost.

Copy the girder assembly.

To copy a 2D hide situation

Select the I-shaped girder and the two square hollow sections.

Right-click the graphics area background, and then choose Copy with
Base Point.

Respond to the prompt as follows:

Specify base point:

Select point P3

162 | Chapter 8 Working with 2D Hide and 2D Steel Shapes

Summary of Contents for 057A1-09A111-1001 - AutoCAD LT 2009































































































































































































































































































































































































































Search results

Summary of Contents for 057A1-09A111-1001 - AutoCAD LT 2009

Reviews:

Related manuals for 057A1-09A111-1001 - AutoCAD LT 2009

Brands by name

Popular brands

Autodesk 057A1-09A111-1001 - AutoCAD LT 2009, User Manual

Search results

Summary of Contents for 057A1-09A111-1001 - AutoCAD LT 2009

Reviews:

Related manuals for 057A1-09A111-1001 - AutoCAD LT 2009

Brands by name

Popular brands