manualshive.com logo in svg

Autodesk 057A1-09A111-1001 - AutoCAD LT 2009, User Manual, Page: 245 / 414

Share
Download
Autodesk 057A1-09A111-1001 - AutoCAD LT 2009 User Manual Download Page 245

This creates a new drawing based on the am_iso template. Use Save As
to save the drawing file with an appropriate name.

NOTE

The ISO standard part standard has to be installed for this tutorial

exercise.

Ensure that mechanical structure is enabled

To enable mechanical structure

1

Click the STRUCT status bar button and latch it down to enable
mechanical structure.

2

If the mechanical browser is not visible, on the command line, enter

AMBROWSER

.

3

When prompted, enter 

ON

.

Configuring Snap Options

Configure the snap options.

Configuring Snap Options | 237

Summary of Contents for 057A1-09A111-1001 - AutoCAD LT 2009































































































































































































































































































































































































































Reviews:

No comments