Aumuller FV1, Assembly And Commissioning Instructions

Page: 25 / 36

25
Assembly Instruction
FV1 / FV3 / FV4
Sequence control:
Sequence control:
24V DC
M
24V DC
M
24V DC
M
24V DC
M
n
ote
Installing M-COM in a voltage-free state.
The configuration is always in CLOSE direc-
tion.
When subsequent programming with UniPC
the same assembly steps as in the installation
must be carried out with
preprogrammed set
(see separate: Installation Instructions for
UniPC).
Open
Locking drive
Opening
drive
Close
Locking drive
Opening
drive
FV4
FV4
Test run: locking drive
„
Close the casement manually. During the test run press
the casement fixed to the frame.
„
Switch on the control voltage at locking drive FV4 - in
CLOSE
direction.
„
Switch the control voltage - from the locking drive
FV4 in OPEN direction.
„
Ensure the easy movement of the casement.
„
Open the casement manually.
„
Switch off
the
control voltage
from the locking drive
FV4 .
„
Switch on
the
control voltage
at locking drive
FV4 and at opening drive - in CLOSE direction.
„
M-COM is configured (see LED display).
„
Check sequence control.
„
Ensure the easy movement of the casement.
Installation: M-COM
„
Installing the M-COM (see separate „Installation
Instructions“ for M-COM) and make the electrical
connection - in accordance with chapter: „
E
lEctric
connEction
- i
nstallation stEP
12 “.
„
Hinge opening drive on casement.
„
Make mechanical settings in accordance with „Assem-
bly and Commissioning Instructions“ of the drives.
I
nstallatIon step
10
a
:
I
nstallatIon step
10
b
:
a
ssembLy with
m-com
a
ssembLy oF a preprogrammed set
Open
Locking drive
Opening
drive
Close
Locking drive
Opening
drive
FV3
FV3
Test run and installation: FV3 and opening
drive as a preprogrammed set
„
Hinge opening drive on casement.
„
Make mechanical settings in accordance with „Assem-
bly and Commissioning Instructions“ of the drives.
„
Switch on the control voltage at locking drive FV3
and at the opening drive - in CLOSE direction.
„
Check sequence control.
„
Ensure the easy movement of the casement.
Test run: locking drive
„
Close the casement manually. During the test run press
the casement fixed to the frame.
„
Switch on the control voltage at locking drive
FV3 and at the opening drive - in CLOSE direction.
„
Move locking drive FV3 and opening drive in OPEN
direction.
„
Ensure the easy movement of the casement.
„
Open the casement manually.
FV4
FV3
a
nsChlusskabel unD
DiP-s
Chalter
a
ssembly with
m-Com
or
a
ssembly of a PreProgrammeD set
06
FV3