Aumuller FV1, Assembly And Commissioning Instructions

Page: 14 / 36

14
Assembly Instruction
FV1 / FV3 / FV4
P
reParing
a
ssembly
I
nstallatIon step
4
a
: t
est run beFore assembLy
a
ssembLy with
m-com
I
nstallatIon step
4
b
: t
est run beFore
- a
ssembLy oF a preprogrammed set
FV4
FV3
The opening drive and the not mounted locking drive FV4
must be tested separately .
The opening drive and the not mounted locking drive FV3
must be tested together .
„
Switch on
the
control voltage
at locking drive
FV3 and at the opening drive - in CLOSE direction.
First the opening drive moves in CLOSE direction, then the
locking drive FV3 begins to start.
„
If necessary, correct the locking stroke - with the DIP
switches (see chapter: „ c
onnEcting cablE and
diP
switch
“).
„
Move locking drive FV3 and the opening drive in
OPEN direction.
„
Switch off the control voltage from the locking
drive FV3 and form the opening drive.
„
Assembly the locking drives
FV3
- according to
installation step 5 - 10.
During start-up of locking drives FV4 the 24
V-control voltage may be switched on only:
• with opened casement
• unhinged opening drive
During start-up of locking drives FV3 the
24 V-control voltage may be switched on only:
• with opened casement
• unhinged opening drive
„
Unhinge the opening drive.
„
Switch off the control voltage from the opening
drive.
„
Unhinge the opening drive and open the casement
manually.
Test run: Opening drive
„
Switch on t
he
control voltage
at the opening drive
.
„
Move opening drive in CLOSE direction.
„
Move opening drive in OPEN direction and ensure the
ease of movement of casement.
Test run: locking drive
„
Make the connection for the control voltage to the
not mounted locking drive FV4 (see chapter: „ E
lEctric
connEction
- i
nstallation stEP
12 “).
Test run: locking drive
„
Make the connection for the control voltage to the
not mounted locking drive FV3 (see chapter: „ E
lEctric
connEction
- i
nstallation stEP
12 “).
„
Switch on the control voltage at locking drive FV4
- in CLOSE direction.
„
If necessary, correct the locking stroke - with the DIP
switches (see chapter: „ c
onnEcting cablE and
diP
switch
“).
„
Move locking drive
FV4
in
OPEN
direction.
„
Switch off the control voltage from the locking
drive FV4 .
„
Assembly the locking drives FV4 - according to
installation step 5 - 10.
n
ote
Drives from the factory preprogrammed sets
do not work individually!
04 04