Aumuller FV1, Assembly And Commissioning Instructions

Page: 26 / 36

26
Assembly Instruction
FV1 / FV3 / FV4
07
Cable on casement Cable in glazing bead
Connection cable routing on the casement:
• Cable must be protected against damage (shearing-off, kinking,
splitting), i.e. by using bushings.
Upon removal of the glazing bead is the dan-
ger that the glass may fall.
Cable routing on or in the casement
Cable crossover without
protective cable hose
Cable crossover with
protective cable hose
Connection cable routing on the hinge side:
• Make sure that during opening or closing procedure the cable will
not be damaged by shearing-off, kinking, crushing.
• Protect cable feedthrough in profile e.g. by using cable bushings,
cable transitions.
RA RA FL
BD protective cable
hose BD AK
FL
Cable duct glued on
(in addition secured with
countersunk screws against
breaking away). Drill hole in glazing bead
(cable bushing protects against
damage to cable).
I
nstallatIon step
11: c
abLe routing
Cable routing on the frame
„
Route cable on the frame or mullion/transom.
Cable must be protected against damage (shearing-off,
kinking, splitting).
cable duct glued on
(in addition secured with
countersunk screws against
breaking away)
AK
RA
FV
x
FV
x
FL
AK
AK
RA
RA
07
e
leCtriC ConneCtion