User's Manual
59
February 2007
MP-202 Telephone Adapter
7. Making VoIP Calls
3.
Press 'Flash' again to put B and C in a 3-way conference.
4.
To end the 3-way conference call, on-hook. Alternatively, press 'Flash' again.
¾
To extend an existing call with party B into a 3-way conference by
bringing in party C when 'Flash + digits sequence' is configured
(refer to '
Configuring Dialing Parameters'
on page 41):
1.
During a call with party B, press 'Flash' and then the '1' key on the phone; Party B is
now placed on hold and you'll hear a dial tone.
2.
Dial party C's number and wait until the call is established.
3.
Press 'Flash' and then the '3' key to put B and C in a 3-way conference.
4.
To end the 3-way conference call, on-hook. Alternatively, press 'Flash' and then the '3'
key.
7.6
Forwarding Calls to Another Phone
¾
To forward calls to another phone:
1.
First configure call forwarding (refer to 'Configuring Services Parameters' on page
47
)
2.
Pick up the phone.
3.
Make sure that you can hear a dial tone
4.
Dial the call forward key sequence, for example, *32; you'll hear a dial tone.
5.
Dial the number of the phone to which you want calls forwarded; you'll hear a stutter
tone (refer to 'Configuring Services Parameters' on page
47
).
6.
Replace the receiver; from now on, all incoming calls will be forwarded. Every time
you pick up this receiver you'll hear the stutter tone for the length of time you
configured for parameter 'Stutter Tone Duration'.
¾
To deactivate calls fowarding:
1.
Pick up the phone; you'll hear a stutter tone.
2.
Dial the call forward key sequence.
3.
Replace the receiver.
4.
To make sure you've de-activated, pick up the phone again; you should hear a regular
dial tone and not the stutter tone.