User's Manual
23
February 2007
MP-202 Telephone Adapter
3. Setting up a Network Connection
3.1.2 Windows
2000
1.
Access 'Network and Dialing Connections' from the Control Panel.
2.
Right-click on the Ethernet connection's icon, and select 'Properties' to display the
connection's properties.
3.
Select the 'Internet Protocol (TCP/IP)' component, and press the 'Properties' button.
4.
The 'Internet Protocol (TCP/IP)' properties will be displayed.
5.
Select the 'Obtain an IP address automatically' radio button.
6.
Select the 'Obtain DNS server address automatically' radio button.
3.1.3 Windows
NT
1.
Access 'Network' from the Control Panel to display the network control panel.
2.
From the 'Protocol' tab, select the 'Internet Protocol (TCP/IP)' component, and press
the 'Properties' button.
3.
From the 'IP Address' tab select the 'Obtain an IP address automatically' radio button.
4.
From the 'DNS' tab, verify that no DNS server is defined in the 'DNS Service Search
Order' box and no suffix is defined in the 'Domain Suffix Search Order' box.
3.1.4 Linux
1.
Login into the system as a super-user, by entering `su' at the prompt.
2.
Type 'ifconfig' to display the network devices and allocated IP's.
3.
Type 'pump -i <dev>', where <dev> is the network device name.
4.
Type 'ifconfig' again to view the new allocated IP address.
5.
Make sure no firewall is active on device <dev>.
3.2
Configuring the MP-202's Network Connection
The Web-based management interface of the MP-202 allows you to control the device's
system parameters. The interface is accessed through a Web browser. For detailed
information on the gateway's Web-management interface, refer to 'Using the MP-202's
Web Interface' on page
31
¾
To access the Web-based management interface:
1.
Launch a Web browser on your PC.