User's Manual
51
February 2007
MP-202 Telephone Adapter
5. Configuring VoIP Parameters
Table
5-13: VoIP - Line Settings
Parameter
Description
Line Number
A telephone port in the MP-202 to which you can connect a standard
(POTS) telephone. You can manage which telephone is operational by
checking the check-box adjacent to it.
User ID
This telephone's VoIP user ID, used for identification to initiate and accept
calls.
Block Caller ID
Check this check box to hide your ID from the remote party.
Display Name
Used to define a name to intuitively identify the line. A free text description
to be displayed to remote parties as your caller ID.
Authentication User
Name
The user name received from the VoIP Service Provider. Used when
sending a response to Unauthorized or Proxy Authentication Requested
(401/407).
Authentication
Password
The password received from the VoIP Service Provider. Used when
sending a response to Unauthorized or Proxy Authentication Requested
(401/407).
5.1.7
Configuring Speed Dial Settings
Use the 'Speed Dial Settings' screen to associate a called party's contact parameters
(including the IP address of his/her ATA and Line ID) with a number that you'll dial to call
him/her. The number of speed-dialing codes that can be defined is unlimited. Use the
screen to define a destination type: Proxy, Local Line or Direct Call.
Note that when connecting the MP-202 to a World-Wide SIP Server (refer to' Connecting
MP-202's VoIP to a VoIP Service Provider' on page
55
), you don't need to configure 'Speed
Dial Settings'.
¾
To configure 'Speed Dial' settings:
1.
Click tab 'Speed Dial'; the 'Speed Dial' screen opens.
Figure
5-12: VoIP - Speed Dial