User's Manual
21
February 2007
MP-202 Telephone Adapter
3. Setting up a Network Connection
3
Setting up a Network Connection
¾
To set up a network connection:
1.
Define your PC's network connection (refer to 'Defining Your PC's Network
Connection' on page
21
)
2.
Configure the MP-202's network connection (refer to 'Configuring the MP-202's
Network Connection' on page
23
)
3.1
Defining Your PC's Network Connection
Refer to MP-202 Telephone Adapter Quick Installation Guide for instructions relating to
installation on a Windows™ operating system.
Each network interface on the PC should either be configured with a statically defined IP
address and DNS address, or should be instructed to automatically obtain an IP address
using the Network DHCP server.
The MP-202 provides a DHCP server on its LAN and it is recommended to configure your
PC to obtain its IP and DNS server IPs automatically.
This configuration principle is identical but performed differently on each operating system.
Refer to 'Windows XP' on page
22
Refer to 'Windows 2000' on page
23
Refer to 'Windows NT' on page
23
Refer to 'Linux' on page
23