MP-202 Telephone Adapter
58
LTRT-50604
MP-202
Note:
If you press 'Flash' again before the other party answers, you'll revert to the
original call. If, however, the other party answers and you press 'Flash', a 3-
way conference is established.
¾
To place the remote party on hold when 'Flash + digits sequence'
is configured (refer to '
Configuring Dialing Parameters'
on page 41):
1.
Press the 'Flash' key and then the '1' key on the phone; the phone plays a dial tone. At
this point you can initiate a second call by dialing another party's number.
2.
To cancel the hold state and resume the previous phone call, press 'Flash' and then
'1'.
7.4
Performing a Call Transfer
¾
To transfer an existing call with (B) to a third party (C) when 'Flash
only' is configured (refer to '
Configuring Dialing Parameters'
on page
41):
1.
During a call with party B, press 'Flash'; Party B is placed on hold and you'll hear a dial
tone.
2.
Dial party C's number.
3.
You can wait for C to answer or not.
4.
On hook; you've transferred B to C.
¾
To transfer an existing call with (B) to a third party (C) when 'Flash
+ digits sequence' is configured (refer to '
Configuring Dialing
Parameters'
on page 41):
1.
During a call with party B, press 'Flash' and then the '1' key on the phone; Party B is
placed on hold and you'll hear a dial tone.
2.
Dial party C's number.
3.
You can wait for C to answer or not.
4.
Press the 'Flash' key and then the '2'; you've transferred B to C; a warning tone is
heard.
7.5
Establishing a 3-Way Conference
¾
To extend an existing call with party B into a 3-way conference by
bringing in party C when 'Flash only' is configured (refer to
'
Configuring Dialing Parameters'
on page 41):
1.
During a call with party B, press 'Flash'; Party B is placed on hold and you'll hear a dial
tone.
2.
Dial party C's number and wait until the call is established.