MP-202 Telephone Adapter
114
LTRT-50604
MP-202
2.
Define a VLAN ID for each device. Verify that you've got a new interface on the WAN
side (WAN Ethernet 2) (refer to the figure below).
Figure
10-16: Verifying a New Interface on the WAN Side
3.
Enter the new interface by clicking the Action icon (shown in the screen above); the
screen shown below opens.
Figure
10-17: Configuring WAN Ethernet
4.
Assign an IP address (static / DHCP) to the new interface. Configure the parameter
'Internet Protocol' to the Static IP option of 'Use the Following IP Address'; the screen
shown below opens.
Figure
10-18: Use the Following IP Address