User's Manual
201
February 2007
MP-202 Telephone Adapter
13. Advanced Settings
13.19.2 DHCP Relay Parameters
To configure a device as a DHCP relay, perform the following steps:
1.
Select the 'DHCP Relay' option in the 'IP Address Distribution' drop-down list under
the screen section 'Service' (refer to the figure).
Figure
13-29: Advanced - IP Address Distribution - DHCP Relay
2.
Click the link 'New IP Address'; the 'DHCP Relay Server Address' screen opens (refer
to the figure).
Figure
13-30: Advanced - IP Address Distribution - DHCP Relay - New IP Address
3.
Specify the IP address of the DHCP server.
4.
Click 'OK' to save the settings.
5.
Click 'OK' once more in the 'DHCP Settings' screen.
6.
Click the icon 'Network Connections' on the sidebar of the main screen; the screen
'Network Connections' opens.
7.
Click the link 'WAN Ethernet'; the 'WAN Ethernet Properties' screen opens.
8.
Press the button 'Settings'; the screen 'Configure WAN Ethernet' opens.
9.
In the screen section 'Routing', select 'Advanced' from the drop-down list; the screen
refreshes.
10.
In the 'Routing Mode' drop-down list, select 'Route'; this changes the gateway's WAN
to work in routing mode, which is necessary in order for DHCP relaying to function
correctly.
11.
Click 'OK' to save the settings.