AudioCodes Media Pack MP-112, User Manual

Page: 406 / 486

SIP User's Manual 406 Document #: LTRT-65412
MP-11x & MP-124
Answer Supervision:
•
Polarity Reversal: device sends a 200 OK in response to an INVITE only when it
detects a polarity reversal.
The Answer Supervision feature enables the FXO device to
determine when a call is connected, by using one of the following methods:
•
Voice Detection: device sends a 200 OK in response to an INVITE only when it
detects the start of speech (or ringback tone) from the Tel side. (Note that the IPM
detectors must be enabled).
9.6.1.2 Two-Stage Dialing
Two-stage dialing is when the IP caller is required to dial twice. The caller initially dials to
the FXO device and only after receiving a dial tone from the PBX (via the FXO device),
dials the destination telephone number.
Two-stage dialing implements the Dialing Time feature. Dialing Time allows you to define
the time that each digit can be separately dialed. By default, the overall dialing time per digit
is 200 msec. The longer the telephone number, the greater the dialing time.
The relevant parameters for configuring Dialing Time include the following:

DTMFDigitLength (100 msec): time for generating DTMF tones to the PSTN (PBX)
side

DTMFInterDigitInterval (100 msec): time between generated DTMF digits to PSTN
(PBX) side