AudioCodes Media Pack MP-112, User Manual

Page: 318 / 486

SIP User's Manual 318 Document #: LTRT-65412
MP-11x & MP-124
Parameter Description
Play Ringback Tone to Tel Enables the play of the ringback tone (RBT) to the Tel side and
determines the method for playing the RBT.
[PlayRBTone2Tel]

[0]

Don't Play = RBT is not played.
[1]

Play Local = RBT is played to the Tel side of the call when a
SIP 180/183 response is received.
[2]

Play According to Early Media = RBT is played to the Tel
side only if a 180/183 response without SDP is received. If
180/183 with SDP message is received, the device cuts through
the voice channel and doesn't play RBT (default).
[3]
Play Ringback Tone to IP
Play Local Until Remote Media Arrive = Plays the RBT
according to received media. The behaviour is similar to [2] . If a
SIP 180 response is received and the voice channel is already
open (due to a previous 183 early media response or due to an
SDP in the current 180 response), the device plays a local RBT
if there are no prior received RTP packets. The device stops
playing the local RBT as soon as it starts receiving RTP
packets. At this stage, if the device receives additional 18x
responses, it does not resume playing the local RBT.
Determines whether or not the device plays a ringback tone (RBT)
to the IP side for IP-to-Tel calls.
[PlayRBTone2IP]

[0]

Don't Play = Ringback tone isn't played (default).
[1] Play = Ringback tone is played after SIP 183 session
progress response is sent.
Notes:


To enable the device to send a 183/180+SDP responses, set
EnableEarlyMedia to 1.
This parameter is applicable only to FXS interfaces.

If EnableDigitDelivery = 1, the device doesn't play a ringback
tone to IP and doesn't send 183 or 180+SDP responses.