AudioCodes Media Pack MP-112, User Manual

Page: 133 / 486

Version 5.8 133 September 2009
SIP User's Manual 3. Web-Based Management
Table 3-23: Tel to IP Routing Table Parameters
Parameter Description
Web/EMS: Tel to IP Routing
Mode Determines whether to route Tel calls to IP before or after
manipulation of destination number.
[RouteModeTel2IP]

[0]

Route calls before manipulation = Calls are routed before the
number manipulation rules are applied (default).
[1] Route calls after manipulation = Calls are routed after the
number manipulation rules are applied.
Notes:

This parameter is not applicable if outbound Proxy routing is
used.

For number manipulation, refer to ''Configuring the Number
Manipulation Tables''
124 on page .
Web: Src. Trunk Group ID
EMS: Source Trunk Group ID The source
[PREFIX_SrcTrunkGroupID]
Hunt Group ID of the call.
The range is 1-99.

If this parameter is not required in the routing rule, leave the field
empty.
Notes:

To denote any Hunt
Web: Dest. Phone Prefix
EMS: Destination Phone
Prefix
Group, you can enter the asterisk (*) symbol.
Called telephone number prefix.
The prefix can include up to 50 digits.
[PREFIX_DestinationPrefix]
Note: The destination phone prefix can be a single digit or a range of
digits. For available notations representing multiple numbers/digits,
refer to ''Dialing Plan Notation for Routing and Manipulation''
377
on page
.
Web/EMS: Source Phone
Prefix Calling telephone number prefix.
The prefix can include up to 50 digits.
[PREFIX_SourcePrefix]
Note: The source phone prefix can be a single digit or a range of
digits. For available notations representing multiple numbers/digits,
refer to ''Dialing Plan Notation for Routing and Manipulation''
377
on page
.
All Tel calls matching all or any combination of the above routing rules are subsequently sent to the
destination IP address defined below.

For alternative routing, additional entries of the same prefixes can be configured.
Notes:

For notations representing multiple numbers, refer to ''Dialing Plan Notation for Routing and
Manipulation''
377 on page .