LOGS
710-14888-00C EMX4i User Manual
41
6.
Logs
The Logs Menu provides information on events, trips and starter performance.
To access the Logs Menu on the local keypad, press MENU to open the Menu then
select Logs. On the remote keypad, press LOGS.
6.1
Event Log
The Event Log stores details of the starter's most recent trips, warnings, and
operations (including starts, stops and configuration changes).
Event 1 is the most recent and event 384 is the oldest stored event.
NOTE
The event log can be exported to an external file for analysis away from the
starter. Refer to
USB Save & Load
on page 36 for details.
6.2
Counters
The counters store statistics on the starter's operation:
•
Hours run (lifetime and since counter last reset)
•
Number of starts (lifetime and since counter last reset)
•
Number of times the thermal model has been reset
To view the counters:
1.
Open the Logs.
2.
Scroll to counters and press .
3.
Use the and buttons to scroll through the counters. Press to view
details.
4.
To reset a counter, press then use the and buttons to select
Reset/Do Not Reset. Press STORE to confirm the action.
To close the counter and return to the Logs, press .
6.3
QR Code
The EMX4i can generate a QR code which allows a smartphone to display key
information about the starter, including serial number, firmware versions and
installed options, plus details of the starter’s three most recent trips. This
information can be useful when requesting assistance from your local supplier.
NOTE
You must install AuCom's free Pocket Technician app in order to read the
QR code.
