ATX UCrypt Operation Manual Download Page 51

Page: 51 / 84

CHAPTER 5: SYSTEM TAB

MDU Solutions

– UCrypt

Monitoring Server - Operation Manual

5-11

Table 5 .2a: VLAN Settings (See Figure 5-27)

Field

Confi gurable

Value

Interface Role

Dropdown Menu Management/Primary. Other options are available which should not be selected if you are setting

up a VLAN for remote management.

Base Address

Dropdown Menu Base address on which VLAN will operate.

VLAN Tag

Integer

802.1Q VLAN Tag identifi er to apply to the connection.

Use DHCP Client

Tick Box/Switch

Un-Ticked (Grayed out) for static IP address, ticked (checked) for DHCP.

DNS Server

IP Address

An external DNS server which can resolve URLs.

DNS Search Domain URL/IP Address The DNS search domain as required by your network.
NTP Server

URL/IP Address An accessible external NTP server to synchronize clock time on the Monitoring Server.

SNMP Access

Tick Box/Switch

Tick to allow SNMP messages on this interface. If enabled, the SNMP port will be enabled on

this interface.

Management GUI

Tick Box/Switch

Ticked to expose UI ports on this interface. Must be active on at least one interface.

ICMP Ping

Tick Box/Switch

Tick to enable ping response on this interface.

Support Access

Tick Box/Switch

If enabled, the support (ssh) port will be enabled on this interface; note it is strongly encouraged

to leave this enabled on at least one interface.

6. A VLAN is added to Interfaces with a name such as eth0.1 but is not yet activated, Figure 5-28.
7. Click

Apply Confi guration

button to activate changes.

8. If it is required to edit any existing interface, click the

Edit Icon

for the interface.

9. Created VLANs may be deleted by clicking the red

icon.

5 .3 Syslog Forwarding

This feature is required if a fi rewall exists between monitored UCrypt Servers and the Monitoring Server. In this case you may

specify that syslogs received from monitored UCrypt Servers are forwarded to the fi rewall or router IP address. The fi rewall or

router will then need to have UDP port 10514 forwarded to the Monitoring Server. The IP address specifi ed here will be used

to inform all monitored UCrypt Servers to send their syslog reports to this address instead of directly to the Monitoring Server.

Procedure

This procedure explains how to set up a syslog forwarding IP address.

1. Click the

System

tab if it is not already selected, Figure 5-29.

2. Click

Confi gure Syslog Forwarding IP

under Network Confi guration.

Figure 5-28: VLAN is Added to Interfaces

Figure 5-29: Open the System Tab

Summary of Contents for UCrypt





















































































Search results

Summary of Contents for UCrypt

Reviews:

Related manuals for UCrypt

Brands by name

Popular brands

ATX UCrypt, Operation Manual

Search results

Summary of Contents for UCrypt

Reviews:

Related manuals for UCrypt

Brands by name

Popular brands