CHAPTER 5: SYSTEM TAB
MDU Solutions
®
– UCrypt
®
Monitoring Server - Operation Manual
5-21
3. On the
Customize Acceptable Firmware
page that opens, enter the applicable fi rmware versions adjacent the
models of monitored Devices in service in your systems, Figure 5-51. You can get these version numbers from ATX
Networks Technical Support or directly from fi rmware fi les provided by ATX Networks. If using the fi rmware fi le, use
the entire number less any extensions that are part of the fi le name.
4. Click
Save
to apply the changes.
5. Click
Back to System Page
to proceed back to the System page.
6. In the event of a mismatch between installed and acceptable versions, a warning will be displayed adjacent the
Device with the mismatch, Figure 5-52. The entered number is compared to the fi rmware version number installed in
each machine and must match exactly, so even a typo may cause a mismatch error.
5 .15 .2 Customize MSO Fields
MSO fi elds are the Monitored Device Identifi cation column headings, highlighted in Figure 5-53, found in the Servers (Monitored
Devices) list on the Status Page. The highlighted fi elds may be changed to suit specifi c needs and terminology. Procedure to
change these fi elds is found at
“2.6.1 Customize MSO Fields” on page 2-12.
3
4
5
Figure 5-51: Enter Firmware Versions
2
6
Figure 5-52: Firmware Version Mismatch Warning
1
2
3
5
Figure 5-53: Monitored Server Identifi cation Fields
