CHAPTER 5: SYSTEM TAB
5-6
MDU Solutions
®
– UCrypt
®
Monitoring Server - Operation Manual
5 .2 .4 Ping Target
Use PING functionality to troubleshoot network connectivity from any Ethernet Interface.
1. Click the
System
Tab, Figure 5-11.
2. Click
Confi gure
under
Network Confi guration
section.
3. Click the
Ping
button on any interface to initiate the Ping function, Figure 5-12.
4. Enter the Target remote IPv4 address of the device to be pinged, Figure 5-13.
5. Click the
Ping
button.
6. The ping results are shown, Figure 5-14. To continue with another ping to this address, click
Ping
again.
7. Alternately try another target by entering its IP address then click
Ping
.
Click
Cancel
to exit the Ping function.
1
2
Figure 5-11: Confi gure Network
3
Figure 5-12: PING from an Interface
4
5
Figure 5-13: PING from an Interface
6
7
Figure 5-14: PING Results
