ATX UCrypt Operation Manual Download

Page: 55 / 84

CHAPTER 5: SYSTEM TAB

MDU Solutions

– UCrypt

Monitoring Server - Operation Manual

5-15

5 .7 Confi gure Authentication

Terminal Access Controller Access-Control System (TACACS, usually pronounced like tack-axe) refers to a family of

related protocols handling remote authentication and related services for networked access control through a centralized

server(Wikipedia). Use of for user access allows more fi ne grained control of user permissions.

Procedure

This procedure outlines steps to activate and edit Settings.

1. Click the

System

tab if it is not already selected, Figure 5-37.

2. Click

Confi gure TACACS Authentication

under the User Authentication section.

3. The

Confi gure Server

page opens, see Figure 5-38. To activate click the tick box.

4. Enter the Server IPv4 address, Port and the Secret(the shared secret(password) used to authenticate

using the Server). If the secret contains spaces, enclose the whole secret within quotes. You may click the

EYE

icon or

Show Secret

to view the secret password, otherwise it is hidden.

5. Additional options are available:

a) Default to Admin Level Access:

Tick to cause a default to admin level access when ACS (Access Control System) attribute

‘ATXNetworkUserGroups’ is not present.
NOTE: ATXNetworksUserGroup (an ACS attribute) is referencing a custom attribute within an ACS

shell profi le. If a user logs in and they are not part of the specifi ed custom attribute, in this case

‘ATXNetworkUserGroup’ which values include admins,masters,tacacsadmin then the server defaults

to admin level access.

Figure 5-37: Conﬁ gure

Figure 5-38: Edit Server Settings

Summary of Contents for UCrypt





















































































Search results

Summary of Contents for UCrypt

Reviews:

Related manuals for UCrypt

Brands by name

Popular brands

ATX UCrypt, Operation Manual

Search results

Summary of Contents for UCrypt

Reviews:

Related manuals for UCrypt

Brands by name

Popular brands