ATX UCrypt Operation Manual Download

Page: 38 / 84

CHAPTER 4: PROFILES TAB

4-6

MDU Solutions

– UCrypt

Monitoring Server - Operation Manual

Field

Trigger Description Summary

Clear: EAS Event

Refers to the remitting or clearing of the EAS alert.

Clear: CableCARD Entitlement Error

Refers to the remitting or clearing of the CableCARD Entitlement Error alert.

Clear: Tuner Lost PCR Lock Error

Refers to the remitting or clearing of the Tuner Lost PCR Lock Error alert.

Clear: Lost OOB Lock Error

Refers to the remitting or clearing of the Lost OOB Lock Error alert.

Clear: High Tuner Discontinuities/Minute Error

Refers to the remitting or clearing of the High Tuner Discontinuities/Minute Error alert.

Clear: Program Lost Bitrate Error

Refers to the remitting or clearing of the Program Lost Bitrate Error alert.

Clear: Multiplex Dropping Error

Refers to the remitting or clearing of the Multiplex Dropping Error alert.

Clear: Output QAM Lost Bitrate Error

Refers to the remitting or clearing of the Output QAM Lost Bitrate Error alert.

Clear: Output QAM Channel Restarting Error

Refers to the remitting or clearing of the Output QAM Channel Restarting Error alert.

Clear: SDV Lost Resolve Error

Refers to the remitting or clearing of the SDV Lost Resolve Error alert.

Clear: Tuning Resolver Lost Lock Error

Refers to the remitting or clearing of the Tuning Resolver Lost Lock Error alert.

Clear: Power Supply Failure

Refers to the remitting or clearing of the Power Supply Failure alert.

Clear: DQAM Configured But Not Detected

Refers to the remitting or clearing of the DQAM Configured But Not Detected alert.

Clear: Tuner Board Configured But Not Detected

Refers to the remitting or clearing of the Tuner Board Configured But Not Detected alert.

Tuner Board Configured but not Detected

Refers to programs known to be assigned to tuner boards will be missing from the output.

Restarting DQAM Channel

Refers to a DQAM Channel continuously restarting.

DQAM Configured But Not Detected

Refers to UCrypt device configuration has programs assigned to a DQAM but the DQAM has not been detected.

System Booted

Refers to the UCrypt Server main board being rebooted.

CableCARD stopped Decrypting

Refers to a CableCARD that has stopped decrypting.

Program Lost Bitrate

Refers to lack of presence of MPEG video packets for the program in question. This error is reporting on a single program in a QAM
and is not indicating the failure of the QAM as a whole.

SNMP Online Transition

Monitors that the device is actually online via SNMP (if not specified in the profile you will not know if the server is online/offline)

4 .5 Working with Interventions

Interventions are the reported actions that were taken by a field technician or actions that may have occurred automatically

that resulted in clearing an Alert. Each Alert will need to have an Intervention recorded when it is acknowledged. Later when a

report is generated, the Intervention and the person responsible (the user logged into the Monitoring Server) will be registered

in the log. Refer to Table 4.5a for a list of interventions and types available. The list is fixed and cannot be changed or modified

by the MSO. The list is provided here for your convenience.

Table 4 .5a: Interventions List for Reference

Interventions

Intervention Type

CableCARD 0 stopped Decrypting

Automatic Recovery

CableCARD 1 stopped Decrypting

Automatic Recovery

CableCARD 2 stopped Decrypting

Automatic Recovery

CableCARD 3 stopped Decrypting

Automatic Recovery

CableCARD 4 stopped Decrypting

Automatic Recovery

CableCARD 5 stopped Decrypting

Automatic Recovery

CableCARD 6 stopped Decrypting

Automatic Recovery

CableCARD 7 stopped Decrypting

Automatic Recovery

CableCARD 8 stopped Decrypting

Automatic Recovery

CableCARD 9 stopped Decrypting

Automatic Recovery

CableCARD regained Entitlement

Automatic Recovery

OOB Lock Regained

Automatic Recovery

Output QAM regained Bitrate

Automatic Recovery

Program Regained Bitrate

Automatic Recovery

SDV Tuner Lost Resolve

Automatic Recovery

Server Power Cycled (Automatic)

Automatic Recovery

Tuner Board Automatically Regained PCR Lock

Automatic Recovery

Clicked Apply

Intervention

CABLECard Keeps Initializing

Intervention

Summary of Contents for UCrypt





















































































Search results

Summary of Contents for UCrypt

Reviews:

Related manuals for UCrypt

Brands by name

Popular brands

ATX UCrypt, Operation Manual

Search results

Summary of Contents for UCrypt

Reviews:

Related manuals for UCrypt

Brands by name

Popular brands