CHAPTER 2: STATUS TAB
MDU Solutions
®
– UCrypt
®
Monitoring Server - Operation Manual
2-5
2 .3 .5 Start Monitoring
After adding remote Devices, the monitoring process must be started for that Device. This process sets up the communications
protocols between the remote Devices and the Monitoring Server.
Procedure
This procedure describes the steps required to start the monitoring process for one or more remote Devices.
1. Click the
Status Tab
if it is not already selected, Figure 2-11.
2. Tick the
selection tick box
of any remote Devices that will have monitoring started.
3. Verify the control selector is set to
Start Monitoring
(the default setting).
4. Click the
Go
button.
5. Use the
Profi le
dropdown menu, Figure 2-12, to select the
Monitoring Profi le
to be applied to this Device (or group
of Devices if more than one was selected). There are default Profi les available for each type of Device; UCrypt, DVIS,
DigiVu and you may create your own custom profi les for each Device type to select from.
6. Click the
Go
button.
7. A message indicating success is displayed, Figure 2-13. Click
Back to Status page
to return to the Status page.
1
2
3
4
Figure 2-11: Start Monitoring
5
6
Figure 2-12: Select Monitoring Profi le
7
Figure 2-13: Back to Status Page
