CHAPTER 2: STATUS TAB
2-12
MDU Solutions
®
– UCrypt
®
Monitoring Server - Operation Manual
2 .6 Site Identifi cation for Devices
Each listed UCrypt Device may have
site specifi c identifi cation information
added to aid in identifying its location and MSO
status. This identity information appears in the fi elds of the Devices List and to further customize the information, the fi elds
may be changed to suit the MSO (To customize fi elds see
“2.6.1 Customize MSO Fields” on page 2-12)
. As an example we
show a Device before adding identifi cation info in Figure 2-29. (To add Device identifi cation information see
“2.6.2 Device Site
Identifi cation” on page 2-13
)
.
After adding the identity information and changing MSO Fields the new format is shown in Figure 2-30. (To customize fi elds
see
“2.6.1 Customize MSO Fields” on page 2-12
)
.
2 .6 .1 Customize MSO Fields
MSO fi elds are part of the UCrypt Device Site Identifi cation fi elds and may be changed from default to suit specifi c MSO needs
and terminology. Access the link to make these changes from the
System
page.
Procedure
This procedure explains how to change the MSO fi elds.
1. Click the
System
tab if it isn’t already selected, Figure 2-31.
2. Under the
Monitoring Server Details
section, click
Customize MSO Fields
, Figure 2-32.
1
2
3
5
Figure 2-29: Monitored Device Without Site Identifi cation
1
2
Figure 2-30: Monitored Device With Site Identifi cation Added
1
Figure 2-31: Select System Tab
2
Figure 2-32: Select Customize MSO Fields
