manualshive.com logo in svg

ATX DigiVu II, Operation Manual, Page: 76 / 114

Share
Download
ATX DigiVu II Operation Manual Download Page 76

CHAPTER 1: ETHERNET MULTIPLEXER

9-4 

VersAtive

®

Pro, DigiVu

®

 II, DigiVu

®

 II Micro – Operation Manual

9.4  Adding TS Source Programs

Each TS Source may have one or many programs available as it may be an SPTS or MPTS. Select programs from the added 

TS sources to fill the MUX.

1.  With the TS Source selected in Tree View, click Analyze, Figure 1-8. 

 

2.  Click to select the Program to be added in the left MPTS Results window, Figure 1-9. 

 

3.  Click the Source Multiplex in the right MUX window.
4.  Click the Right Arrow to add the program to the MUX.

• 

Repeat to add more required programs from this TS Source to the MUX if there are multiple.

• 

Programs may be deleted by selecting them in the MUX window then click the Left Arrow.

5.  The Program is added to the output MUX, Figure 1-10. 

 

6.  Click OK to save this result.

Figure 1-8: Add Program to TS Source

Figure 1-9: Select Program and Source

Figure 1-10: Program is added to TS Source

Summary of Contents for DigiVu II



















































































































Reviews:

No comments