manualshive.com logo in svg

ATX DigiVu II, Operation Manual, Page: 63 / 114

Share
Download
ATX DigiVu II Operation Manual Download Page 63

CHAPTER 1: PUBLISH SETTINGS

VersAtive

®

Pro, DigiVu

®

 II, DigiVu

®

 II Micro – Operation Manual 

7-1

PUBLISH SETTINGS

7.  Publish Settings

This chapter describes the configuration variables for SPTS, HLS and Flash publishing dialogs. 

Note: 

See 

“Encoding Application” on page 4-1

 and 

“Transcoding Application” on page 5-1

 for 

programming and setup procedures.

7.1  Chapter Contents

• 

“SPTS Publish Settings”

• 

“HLS Publish Settings”

• 

“Adobe® Flash® Publish Settings”

7.2  SPTS Publish Settings 

This page is used to establish publish parameters for publishing an SPTS stream. The procedure to use this is explained in 

“4.3 SPTS Encoding Application” on page 4-5.

Table 7.2a:  SPTS Publish Settings

Setting

Value

Description

Name

String

The  alpha  numeric  identifier  that  you  can  assign. This  should  be  a  meaningful 

name which clearly identifies the Publish or it’s purpose.

Closed Captioning

Tick Box

Tick to include the closed caption (Subtitles) if existing.

CBR Out

Integer

Un-tick ‘Automatic’ to enable entering a CBR bitrate for the Video stream.

Automatic

Tick Box

Tick to turn on Variable Bit Rate output. Un-tick to set to CBR then enter an integer 

in CBR Out. Default is ticked, 

VBR

.

Program No. xxxx

Integer

Enter the MPEG program number to change default value.

PCR/PMT PID xx

Integer

Change default values if required. Default PCR PID always follows Video PID.

Video PID xx

Integer

Change default value if required.

Audio PID xx

Tick Box / 

Integer

Input audio PIDs detected are listed along with their PID number and language. 

Tick to include this language in the output. Mouse over Info icon 

to see the 

language of the audio stream.

Add New Connection

Protocol

Dropdown menu Choice between UDP & RTP; default is 

UDP

.

Figure 1-1: SPTS Publish Settings

Summary of Contents for DigiVu II



















































































































Reviews:

No comments