ATX DigiVu II Operation Manual Download Page 58

Page: 58 / 114

CHAPTER 1: SESSION SETTINGS

6-2

VersAtive

Pro, DigiVu

II, DigiVu

II Micro – Operation Manual

Setting

Value

Description

Video Encoding Parameters

Use Video

Tick box

Tick to enable the Video stream in the output.

Codec

Dropdown menu Choice between MPEG2 & H.264. Some following settings depend on this choice.

Codec Profile

Dropdown menu Choices of Baseline, Main, High, Low Latency.

Bit Rate

Integer

Enter encoding rate in kbps.

Codec Speed

Dropdown menu Adjust for best performance based on scene action. Recommended to use default

setting for most streams.

Subtitles Method

Dropdown menu Determines how subtitles (closed captions) are handled; default is On Separate

PIDs.

•

On Separate PIDs: Subtitles are placed on PIDs separate from video and audio

streams.

•

Overlay in video: Subtitles are added into the video stream.

•

Ignore Subtitles: Subtitles are not passed through.

VBR

Tick box

Tick to enable variable Bit Rate output; default is

Constant Bit Rate

(Un-ticked)

Keyframe Duration

Dropdown menu The time period in seconds between IDR keyframes; default is

2 seconds

Badapt

Tick Box

Turn on the adaptive B-frame placement decision algorithm. This setting controls

how H.264 decides between placing a P or B-frame. Choice is true (Ticked) or

false (not ticked), default is

Box Ticked

MPEG2 Level

Dropdown menu Only in effect for MPEG2 codec. Choice is Main & High.

Scenecut

Tick Box

Selected (enabled) by default (and cannot be disabled in MPEG2 Codec),

adaptive I-frame decisions are enabled. Disabling Scenecut prevents H.264 from

generating a key frame when there is a scene cut in the video; important to keep

key frames consistent for multi-bitrate videos. See Figure 1-4 & Figure 1-3

and

description below.

Bframes

Dropdown menu Specifies the maximum number of concurrent B Frames that H.264 can use;

default is

CABAC

Tick box

Enables CABAC (Context Adaptive Binary Arithmetic Coder) stream compression

and reverts to CAVLC (Context Adaptive Variable Length Coder) system if un-

ticked, which significantly reduces efficiency and the decoding requirements.

Default

CABAC

(Ticked).

Video Pre-processing Parameters

Frame Rate

Dropdown menu Encoded frames per second; default is use original. Choices between 1 and 60.

Resolution

Dropdown menu Select from many choices for the appropriate resolution.

Top Field First

Dropdown menu Ordering of fields either Top or Bottom field first. Default is

Auto

Aspect ratio

Dropdown menu Choice between 1:1, 4:3 and 6:9 or Use Original; default is

Use Original

De-Interlace

Tick Box

Allows de-interlacing of video frames to convert from Interlace to Progressive if

box is ticked; default is

not ticked

(no de-interlace).

Interlace Method

Dropdown menu Only effective if De-Interlace is selected. De-interlace choices between Simple

and Advanced detect (with and without Double Frame rate) and Linear; default is

Linear

Cropping

Integer

If box ticked, enter number of Pixels to be cropped from each side of the picture.

Summary of Contents for DigiVu II



















































































































Search results

Summary of Contents for DigiVu II

Reviews:

ATX DigiVu II, Operation Manual, Page: 58 / 114

Search results

Summary of Contents for DigiVu II

Reviews: