manualshive.com logo in svg

ATX DigiVu II, Operation Manual, Page: 20 / 114

Share
Download
ATX DigiVu II Operation Manual Download Page 20

CHAPTER 2: GENERAL (GLOBAL) CONFIGURATION

2-4 

VersAtive

®

Pro, DigiVu

®

 II, DigiVu

®

 II Micro – Operation Manual

2.3  System Time

System time is set by default to be automatically updated by an internally defined NTP server. This setting may be changed to 

setting the time and date manually or an alternate NTP server may be specified.

2.3.1  Change Time Zone & NTP Server

1.  Click 

General

 Icon at top of Tree View.

2.  Click 

System Time

 tab, Figure 2-9.

3.  Select the appropriate 

Time Zone

 from the dropdown menu.

4.  Click the adjacent 

Apply 

button.

5.  Enter the 

IP Address

 of the desired NTP server (do not enter the URL)

6.  Click the adjacent 

Apply

 button.

Note 

While it is possible to manually change the date on the System, do so with the caution that 

Licensing may be adversely affected. This is to ensure that dates are not changed to defeat licence 

expiry dates. Contact ATX Networks Technical Support if the date on the System needs to be 

manually changed.

2.4  User Management

A single user is defined by default but users may be added or managed as required. Further, Radius authentication may be 

implemented.

2.4.1  GUI Authentication

Add User

1.  Click 

General

 Icon at top of Tree View to select it, Figure 2-10.

Figure 2-9: 

NTP Time Server Configuration

Figure 2-10:  Add New User

Summary of Contents for DigiVu II



















































































































Reviews:

No comments