CHAPTER 1: ENCODING APPLICATION
4-4
VersAtive
®
Pro, DigiVu
®
II, DigiVu
®
II Micro – Operation Manual
8. In the audio Channel Mapping window that opens, Figure 1-8,
select
New
once to create an audio channel which will
be assigned to a PID. Select
New
multiple times to create the desired number of audio channels, each of which will
be assigned a unique PID.
9. Individual output Audio Channels are created (six shown in this example but could be more or less).
10. Customize each channel lineup with the tick boxes and drop down menus. Ticking means the incoming channel
across the top is mapped to the corresponding output, left side.
•
For help with channel mapping, click the Channels Map button, (see it’s position in Figure 1-8) for a display of the
channel abbreviations, Figure 1-1.
11. When finished click
Save
to create the Resource with customized audio channels, Figure 1-8.
12. The
Capture Card Resource
is added to the Tree View, Figure 1-9.
13.
With the
Capture Card Resource
selected in the previous step,
Properties
are displayed in adjacent window.
14. The ‘Preview ON’ tick box is selected by default. Untick the box to disable Preview for this resource only and click
Save
if a change was made.
•
The Preview function requires a small amount of Device CPU cycles. If the Device is running close to 100% CPU
utilization as witnessed by the Device Monitoring page, see
“11.2 Monitoring the Device” on page
,
disabling
preview can help with that condition. Each Resource Preview function must be disabled individually so click each
active resource in the Tree View to access this control.
15. Audio Channel Mapping is displayed if it was customized.
Figure 1-8: Customize Audio Channel Mapping
Figure 1-9: Capture Resource Added to Tree View