ATX DigiVu II Operation Manual Download Page 60

Page: 60 / 114

CHAPTER 1: SESSION SETTINGS

6-4

VersAtive

Pro, DigiVu

II, DigiVu

II Micro – Operation Manual

6.3 Adaptive Session Settings

Table 6.3a: Adaptive Session Settings

Setting

Value

Description

Name

String

The alpha numeric identifier that you can assign. This should be a meaningful

name which clearly identifies the stream or it’s purpose.

Codec

Dropdown menu Default H.264 encoder for adaptive encoding.

Frame Rate

Dropdown menu Encoded frames per second; default is use original. Choices between 1 and 60.

Keyframe Duration

Dropdown menu The time period in seconds between IDR keyframes; default is

2 seconds

Bframes

Dropdown menu Specifies the maximum number of concurrent B Frames that H.264 can use;

default is 2.

Badapt

Tick box

Turn on the adaptive B-frame placement decision algorithm. This setting controls

how H.264 decides between placing a P or B frame. Choice is true (Ticked) or false

(not ticked), default is

not ticked

Scenecut

Tick box

Not selected by default (and cannot be enabled), adaptive I-frame decisions are

disabled. Disabling Scenecut prevents H.264 from generating a key frame when

there is a scene cut in the video; important to keep key frames consistent for multi-

bitrate videos. See Figure 1-3 & Figure 1-4.

Subtitles Method

Dropdown menu Determines how subtitles (closed captions) are handled; default is

On Separate

PIDs

•

On Separate PIDs: Subtitles placed on PIDs separate from video and audio streams.

•

Overlay in video: Subtitles are added into the video stream.

•

Ignore Subtitles: Subtitles are not passed through.

Top Field First

Dropdown menu Ordering of fields either Top or Bottom field first. Default is

Auto

De-Interlace

Tick box

Allows de-interlacing of video frames to convert from Interlace to Progressive if box

is ticked; default is

not ticked

(no de-interlace).

Interlace Method

Dropdown menu De-interlace choices between Simple and Advanced detect (with and without

Double Frame rate) and Linear; default is

Linear

Figure 1-5: Adaptive Session Properties

Figure 1-6: Adaptive Stream Properties

Summary of Contents for DigiVu II



















































































































Search results

Summary of Contents for DigiVu II

Reviews:

ATX DigiVu II, Operation Manual, Page: 60 / 114

Search results

Summary of Contents for DigiVu II

Reviews: