CHAPTER 1: QAM MULTIPLEXER
8-2
VersAtive
®
Pro, DigiVu
®
II, DigiVu
®
II Micro – Operation Manual
8.3 Create a QAM Multiplex
1. Click to select the
Device
, Figure 1-2.
2. Click
Add MPTS Multiplexer
on the Tool Bar (or Right Click menu).
3. Give a
Name
to the MUX(Optional), Figure 1-3.
4.
Select
M-QAM
from the
Output Type
drop down.
5. Select the desired RF output channel from the QAM Channel drop down.
6. Enter the TS (Transport Stream) ID number.
7. Tick
PSIP Enable
if the PSIP should be active on this channel(alternately DVB SI Enable or None), Figure 1-4.
Figure 1-2: Create QAM Multiplex
Figure 1-3: Edit QAM Multiplex
Figure 1-4: Select PSIP for Multiplex