manualshive.com logo in svg

ATX DigiVu II, Operation Manual, Page: 49 / 114

Share
Download
ATX DigiVu II Operation Manual Download Page 49

CHAPTER 1: TRANSCODING APPLICATION

VersAtive

®

Pro, DigiVu

®

 II, DigiVu

®

 II Micro – Operation Manual 

5-3

5.3  SPTS Transcoding

Any number of SPTS Streams may be created for any Ethernet resource. The Ethernet Resource must be created first.

5.3.1  Create an SPTS Stream

Multiple Streams with different parameters may be created for the Ethernet Resource by repeating these steps.

1.  Click to select the Ethernet 

Resource 

icon in the Tree View, Figure 1-7.

2. 

Select 

New SPTS Stream 

on the Tool Bar.

3.  On the new page that opens, Figure 1-8, give the stream a meaningful Name such as the service name.
4.  Edit 

Video

, 

Audio

 & 

Video Pre-processing Parameters 

as required. For details, see 

“Session Settings” on page 

6-1

.

5.  Click 

Apply 

to save and add the session to the Tree View, Figure 1-9 (1).

Figure 1-7: Add New SPTS Stream

Figure 1-8: 

Refine SPTS Stream Settings

Summary of Contents for DigiVu II



















































































































Reviews:

No comments