manualshive.com logo in svg

ATX DigiVu II, Operation Manual, Page: 70 / 114

Share
Download
ATX DigiVu II Operation Manual Download Page 70

CHAPTER 1: QAM MULTIPLEXER

8-4 

VersAtive

®

Pro, DigiVu

®

 II, DigiVu

®

 II Micro – Operation Manual

6.  The new TS Source is added to the MUX in Tree View, Figure 1-8. 

 

7.  To add multiple TS sources to a MUX return to step 1.

• 

Multiple TS sources may be added to a MUX to aggregate content. 

• 

One or more programs may be added from any TS Source.

• 

Programs may be added up to the specified bitrate of the MUX but there is no mechanism to limit the bitrate so be 

careful to not overfill the MUX.

8.5  Adding TS Source Programs

Each TS Source may have one or many programs available as it may be an SPTS or MPTS. Select programs from the added 

TS sources to fill the MUX.

1. 

With the 

TS Source

 selected in Tree View, click 

Analyze

, Figure 1-9. 

 

2.  Click to select the 

Program

 to be added in the left MPTS Results window, Figure 1-10. 

 

3.  Click the 

Source Multiplex

 in the right MUX window.

4.  Click the 

Right Arrow

 to add the program to the MUX.

• 

Repeat to add more required programs from this TS Source to the MUX if there are multiple.

• 

Programs may be deleted by selecting them in the MUX window then click the Left Arrow.

Figure 1-8: New TS Source Added

Figure 1-9: Add Program to TS Source

Figure 1-10: Select Program & Source

Summary of Contents for DigiVu II



















































































































Reviews:

No comments