CHAPTER 3: DEVICE CONFIGURATION
VersAtive
®
Pro, DigiVu
®
II, DigiVu
®
II Micro – Operation Manual
3-3
3.3.2 Change the Default Management Port ETH0
The Management Port may be set to a different physical port than the default ETH0. It may also be set to a VLAN port that
has previously been defined. The current management port is shown at the bottom of the Settings and Info tab, Figure 3-3.
Change the Management Port Assignment
1. Click on the
Device
icon to select it, Figure 3-3.
2.
Select
Settings and Info
tab.
3.
Select
Ethernet Cards
tab.
4. Click Management Interface: eth0
change
link.
5. In the dialog that opens, select the physical or VLAN port, Figure 3-4.
6. Click
Set
to select the chosen interface, Figure 3-5.
7. Click
Save
to apply the changes and return to the GUI, Figure 3-6.
Figure 3-3:
Configure Management Port
Figure 3-4: Select Port
Figure 3-5: Click Set
Figure 3-6: Click Save