manualshive.com logo in svg

ATX DigiVu II, Operation Manual, Page: 45 / 114

Share
Download
ATX DigiVu II Operation Manual Download Page 45

CHAPTER 1: ENCODING APPLICATION

VersAtive

®

Pro, DigiVu

®

 II, DigiVu

®

 II Micro – Operation Manual 

4-11

9.  Click 

Apply

 to save the changes and add the Publish to the Adaptive Stream.

10.  The Publish is 

Added

 and is displayed on the Tree View, Figure 1-25.

11.  The Publish is also displayed on the 

Path Bar

 when the selected in 

Tree View

.

4.5  Start the Encoding Process

The Streaming process is started from the Resource icon and each Resource is started individually.

1.  Click to select the 

Resource

 to be started In the Tree View, Figure 1-26.

2.  Click the 

Start

 button on the Tool Bar (or Right Click menu).

3.  The Streaming starts and is indicated on the Tree View by small triangles in the lower right corner of all streaming 

Element Icons, Figure 1-27.

Figure 1-25: Publish is Added to Adaptive Stream

Figure 1-26: Start the Streaming Process

Figure 1-27: Streaming Started

Summary of Contents for DigiVu II



















































































































Reviews:

No comments