HTTP CONTROL PANEL INTERFACE
5-14
ChromaFlex Chassis – Operation Manual
ATX Confidential & Proprietary
5.7.4 Example for System Command Page for Release 4.5 & Later
Modify
To configure the sysLocation, in the “Community” input box, enter “InnoTrans” then click on the “Submit” button. Check the
“response” session for the command process status. Use the Readback botton to confirm the new value.
1. Go to the System Command Page by clicking on the System Command link in the Header.
2. In the System Command Page; click on the Community Readback button. .
3. Observe the value returned in the Response Box under the response banner.
4. Check the radio button “add”.
5. Type in the text box associated with sysLocationt: “InnoTran rw”.
6. Click on the Submit botton.
7. Observe the response displayed in the Response Box. The command is executed correctly if response is “Successful”.
Figure 5-11 Example of Submit
CHAPTER 5: