CRAFT LINE INTERFACE (CLI)
4-10
ChromaFlex Chassis – Operation Manual
ATX Confi dential & Proprietary
ChromaFlex[slot-7] >GainControl 1 modify MGC
Successful
ChromaFlex[slot-7]
>GainControl
1
MGC
NOTE: The response of a modifi cation request may either be “Request sent” or “Successful”; in
either case, the user shall retrieve the value to confi rm the new value. You may need to wait for a
few seconds or retrieve a couple times to acquire the new value.
LaserTempAlarm:
displays the alarm status of laser temperature.
Example #1: In this example, the module in slot 1 reports the alarm status of laser temperature as
“MajorLoLo” (e.g. Major alarm with reading below the low low threshold) on channel 1.
ChromaFlex [slot-1] >LaserTempAlarm 1
MajorLoLo
LaserPowerAlarm:
displays the alarm status of laser power (front panel displayed as output power).
Example #1: In this example, the module in slot 1 reports the alarm status of laser power as “MajorLoLo”
(e.g. Major alarm with reading below the low low threshold) on channel 1.
ChromaFlex [slot-1] >LaserPowerAlarm 1
MajorLoLo
LaserRfAlarm
: displays the alarm status of laser RF.
Example #1: In this example, the module in slot 1 reports the alarm status of laser RF as “MajorLoLo”
(e.g. Major alarm with reading below the low low threshold) on channel 1.
ChromaFlex [slot-1] >LaserRfAlarm 1
MajorLoLo
ModuleTempAlarm:
displays the alarm status of module temperature.
Example #1: In this example, the module in slot 1 reports the alarm status of module temperature as
Normal.
ChromaFlex
[slot-1]
>ModuleTempAlarm
Normal
4.1.3.2 Chromadigm Chirp Cancelled Transmitter Module (CCT1)
The commands in this section are CCT1 family specifi c.
LaserTemp:
displays the laser temperature reading in Centigrade.
Example #1: In this example, the module in slot 1 reports its laser temperature reading on Laser channel 1
ChromaFlex [slot-1] >LaserTemp 1
CHAPTER 4:
