HAND-HELD DISPLAY MODULE
ChromaFlex Chassis – Operation Manual
3-13
ATX Confi dential & Proprietary
NOTE: Failing to do so may result in the loss of the setting after a reboot/power cycle.
Attn Setting
Sel Ch:
use the right or left bottom to select the channel (receiver number 1 to 4) to modify.
Gain:
use the right or left bottom to step up or down the attenuation.
Save:
use the right or left bottom to toggle the NVRAM mode to “Yes” to save and press select to store the setting
in the NV RAM.
NOTE: Failing to do so may result in the loss of the setting after a reboot/power cycle.
Status Menu:
use left/right buttons to select a channel, valid channel numbers are 1 to 4.
Pwr (dBm)
: displays the reading of optical input power in dBm.
Attn (dB)
: displays the reading of attenuation in dB.
Voltage (V)
: displayed the on board supply voltage.
Alarm Menu:
Rcvr Pwr:
displays the alarm status of each receiver optical input. Use left/right buttons for channel selection,
available channel numbers are 1 to 4.
Module Temp:
displays the alarm status of module temperature.
Chassis Menu:
Temp(C):
displays the module’s temperature reading in Centigrade.
Model
: displays the model name of plug-in module.
HW Ver
: displays the hardware version information of plug-in module.
SW Ver
: displays the software version information of plug-in module.
Ser #
: displays the serial number of plug-in module.
Prev Menu:
Press “Select” will bring the plug-in’s greeting message screen back.
CHAPTER 3:
