62
© 2020 ATEÏS Europe B.V.
7.5
How to receive audio signal from third party equipment over network
PRIMA VA is able to decode simultaneously 4 audio signals. Purpose of decoders is to receive encoded
audio streams from third party equipment over network.
Decoders 5 to 8 are not accessible for users. These decoders are automatically assigned by PRIMA VA
audio engine to dynamic streams like messages or Vox@Net channels.
§
Click on
Advanced config
>
Decoder 1
or
Decoder 2
or
Decoder 3
or
Decoder 4.
Decoders are able to detect automatically under which format streams have been encoded (
Auto-Detect
option on
Format
).
Parameter
Access
Description
Mode
Read / Write
OFF: decoder is inactive – Raw UDP or RTP: streaming protocol
Format
Read / Write
Auto-Detect, MP3, Speex, Linear PCM, G.711 A-law, G.711 mu-
law, G.722, G729ab
Fault if time-out
Read / Write
Fault report if no packets have been received before time-out
Min. packets in Buffer Read / Write
Minimum packets in buffer before starting decoding
Max. packets in Buffer Read / Write
Maximum packets in buffer before dropping packets
Target port
Read / Write
Port on which IP stream is received
Target address (es)
Read / Write
IP address on which IP stream is received
§
Click on Apply changes to save modifications.
