69
© 2020 ATEÏS Europe B.V.
§
Logic inputs
Fault message
Fault description
Front microphone connection
Fireman microphone activation button is faulty (open or short-circuit)
Variable:
micconn
Fault activation:
Monitored (
Basic config
>
Audio
>
Front microphone
page)
Points to check:
PRIMA VA front microphone is connected to front panel XLR plug
Remote input X state
Logic input X value is considered as faulty (open or short-circuit)
Variable:
reminXstate
Fault activation:
Monitored (
Basic config
>
Logic I/O
>
Remote input X
page)
Points to check:
Third party equipment is connected to logic input X
Monitoring 4,7k Ω resistors have been wired on third party equipment
output contact
Remote input X value
Logic input X value is considered as faulty (not active)
Variable:
reminX
Fault activation:
Fault when not active (
Basic config
>
Logic I/O
>
Remote input X
page)
Points to check:
Third party equipment is connected to logic input X
Third party equipment is not faulty
§
Audio
Fault message
Fault description
Front microphone state
Fireman microphone capsule is faulty
Variable:
micstate
Fault activation:
Monitored (
Basic config
>
Audio
>
Front microphone
page)
Points to check:
PRIMA VA front microphone is connected to front panel XLR plug
Audio input X state
No audio signal received on input X
Variable:
inXstate
Fault activation:
Monitored (
Basic config
>
Audio
>
Audio input X
page)
Points to check:
Audio signal is sent from third party equipment
Monitoring threshold and time-out are correctly set
Message X file missing
Unknown audio file is assigned to message X
Variable:
mgsXfilemissing
Fault activation:
File X (
Basic config
>
Messages
>
Message X
page)
Points to check:
Audio file is stored on PRIMA VA (audio file appears in
Basic config
>
Messages
>
Select file
list)
Audio decoder X stream time-
out
No packets received on decoder X
Variable:
decXtimeout
Fault activation:
Fault if time-out (
Advanced config
>
Decoder X
page)
Points to check:
IP stream is available on network
User decoder X state
No audio signal received on decoder X
Variable:
decXstate
Fault activation:
Monitored (
Basic config
>
Audio
>
User decoder X
page)
