Programming Procedures
Night Service with Group Assignment
Use this procedure to assign all extensions and calling groups to a Night
Service group for after-hours coverage.
A maximum of eight Night Service groups can be assigned (no more than one
for each operator position assigned). Any number of telephones can be
assigned to a Night Service group, and a telephone can belong to more than
one group.
Release 2.0 Only
A calling group can also be assigned to a Night Service group.
Entering Programming
Console: Select Menu
→
Sys Program
→
Exit
PC/SPM: Type
SPM
→
press any key
→
[F1]
→
[F5]
Exiting Without Changes
To exit from any screen without making changes, select
Exit
on the console or
press
[F5]
on the PC before saving your entry or menu selection.
Night Service with Group Assignment
3-539
Summary of Contents for MERLIN LEGEND Release 2.0 Analog Multiline Telephone
