Programming Procedures
Step
Display/Instructions
On the console
On the PC
x = list number entered in Step 3
Specify extension to assign to
Allowed List in one of the
following ways:
Extension number
Slot and port number
Logical ID number
DSS
Dial [nnnn]
Type [nnnn]
Dial
✱
[sspp].
Type
✱
[sspp]
Dial #[nnn]
Type #[nnn]
Press DSS button.
If you have a DSS, check the
Toggle the LEDs
red LED for feature status.
On/Off, as required.
The red LED indicates the following:
on = allowed list is assigned
off = allowed list is not assigned
To remove Allowed list from
telephone
Select
Delete.
Press
[F8]
To assign Allowed List to
telephone and assign other
telephones:
If next list number is
sequential
Your previous entry is saved
and the next list number is
shown on line 1 in screen in
Step 5.
If next list number is
not sequential
To assign Allowed List to
telephone when all entries are
complete
Select
Next.
Repeat Step 5.
Press
[F9]
Repeat Step 5.
Select
Enter
and then
Press
[F10]
and then
select
Exit.
press
[F5]
Repeat Steps 2-5.
Repeat Steps 2-5.
Select
Enter
.
Press
[F10]
To return to System
Select
Exit
Press
[F5]
Programming menu
two times.
two times.
Assign Allowed Lists to Telephones
3-465
Summary of Contents for MERLIN LEGEND Release 2.0 Analog Multiline Telephone
