AT&T MERLIN LEGEND Release 2.0 Analog Multiline Telephone, System Programming Manual

Page: 343 / 794

Programming Procedures
Copy Line/Trunk Assignments
Use this procedure to copy outside line/trunk button assignments, pool dial-out
code restrictions (Hybrid/PBX only), and—for operator positions onIy — Night
Service information from a telephone to another telephone or block of
telephones with identical requirements.
If you are copying assignments to a block of telephones and one of the
extensions in the block is in use, the Station B
USY
– Pls wait message is
shown on the display and the copy for the rest of the extensions in the block is
delayed until the busy extension becomes idle. The busy number is not shown,
but if you have a DSS attached, the LED associated with the busy extension is
on. If you exit instead of waiting for the busy extension to become idle, the copy
for the rest of the extensions is canceled; however, the assignments that have
already been copied are not canceled.
If you are copying assignments from an operator position to a block of
telephones that includes both operator and non-operator telephones, the
information is copied only to the operator positions; the non-operator positions
are not affected. Similarly, if you are copying assignments from a non-operator
position to a block of telephones that includes both operator and non-operator
telephones, the information is copied only to the non-operator positions; the
operator positions are not affected. The system provides no error tone to signal
that the copy did not work for all extensions in the block.
3-252 Copy Line/Trunk Assignments