manualshive.com logo in svg

AT&T administration and, Installation And Maintenance Manual

The AT&T Administration and Installation And Maintenance Manual is a comprehensive guide that provides step-by-step instructions for setting up and maintaining your AT&T products. Get access to this essential manual absolutely free by downloading it from manualshive.com. Simplify your installation process and ensure optimal performance with this downloadable manual.

Share
Download
background image

MOVING  A VOICE
TERMINAL

2

3

4

If the voice terminal locations connect to the control
unit 

through a jack field, install a wiring run for each

new voice terminal location according to the
instructions in “Jack Field Wiring,” on page 2-33.  If
the voice terminals connect directly to the control unit,
see "Connecting Voice Terminal Wiring Directly" on
page 2-25.

To connect the new voice terminal to the system, see

the 

instructions in 

“Connecting the  Voice Terminals,”

on page 2-92.

Record the new 

information in the system directory

and on the appropriate planning form. For Release 3,
record this information on Form 1d, Systern Form–
Station Planning and the appropriate Station
Configuration form (Form 3b, Form 3c, Form 3f, or
Form 3g). For Feature Modules 1 and 2, record this

information on the Master Planning Foirm, Station Jack
section and the appropriate Station Configuration
Form.

You can easily move 

a voice terminal from one location to

another within your system without having to reprogram
the voice terminal.

To move 

a voice terminal, do the following:

1   Make sure the necessary wiring is in place at the new

location (see "Voice Terminal Wiring" on page 2-23).
Check Form 1d, System Form–Station Planning for
Release 3 or the Master Planning Form for Feature
Modules 1 and 2 for the number assignments.

2  Unplug the voice terminal at its old location, and plug

it in at its new location.

Modifying the System   2-115

Summary of Contents for administration and





















































































































































































































































































































































































































Reviews:

No comments

Related manuals for administration and

NEC Univerge SV9100 Hardware Manual preview
Univerge SV9100
Brand: NEC Pages: 478
NEC Univerge UM8000 General Description Manual preview
Univerge UM8000
Brand: NEC Pages: 46
Magnavox AZ8350 - Cd Radio Cass Recorder Operating Instructions Manual preview
AZ8350 - Cd Radio Cass Recorder
Brand: Magnavox Pages: 18
D-Box KAI-1P Installation Manual preview
KAI-1P
Brand: D-Box Pages: 12
DC-Connex DCX-313 Quick Start Manual preview
DCX-313
Brand: DC-Connex Pages: 16
Pittway NOTIFIER CBC-CLASS 1 Manual preview
NOTIFIER CBC-CLASS 1
Brand: Pittway Pages: 20
DAPAudio WCA Pack Product Manual preview
WCA Pack
Brand: DAPAudio Pages: 17
LAIA CUTE 12X User Manual preview
CUTE 12X
Brand: LAIA Pages: 9
Sharp XL-S10H Service Manual preview
XL-S10H
Brand: Sharp Pages: 23
Panasonic SC-AK403 Operating Instructions Manual preview
SC-AK403
Brand: Panasonic Pages: 24
Philips VCS235NE Specifications preview
VCS235NE
Brand: Philips Pages: 2
Philips VCS431NE Specifications preview
VCS431NE
Brand: Philips Pages: 2
Philips VCS231NE Specification Sheet preview
VCS231NE
Brand: Philips Pages: 2
Philips ILS-CL-2RES User Manual preview
ILS-CL-2RES
Brand: Philips Pages: 18
Philips dynalite Installation Manual preview
dynalite
Brand: Philips Pages: 20
Philips Allegiant LTC 8500 Series Instructions For Use Manual preview
Allegiant LTC 8500 Series
Brand: Philips Pages: 91
Samsung MAX-VT35 Instruction Manual preview
MAX-VT35
Brand: Samsung Pages: 15
Samsung MAX-VT55 Instruction Manual preview
MAX-VT55
Brand: Samsung Pages: 16

Brands by name

Popular brands

Load more brands