AT&T administration and, Installation And Maintenance Manual

Page: 237 / 404

3 Press
[FlexNum], [Block], [InitSp].
BLOCK
RENUMBERING
1 Enter
P.
2 Press
administration mode by sliding the T/P switch to
Conference twice.
The administration menu appears.
All the intercom numbers are assigned numbers in the 7000 range.
(Add 7000 to the default intercom number. Intercom 10 becomes
7010, intercom 11 becomes 7011, etc.)
4 To assign Flexible Numbering codes, press
[Exit]
and
go to step 4 of Block Renumbering or Single
Renumbering, whichever is the appropriate procedure,
below.
To assign sequential Flexible Number codes to a group of
stations or lines:
1
2
3
4
5
6
7
Enter administration mode by sliding the T/P switch to
P.
Press Conference twice.
The administration menu appears.
Press
[FlexNum].
Press
[Block].
Press
[Lines],
or
[Sations]
to select the screen for the
numbers you want to change.
Press the line button or the Auto Intercom button for
the first line or station on the console to be changed,
i.e., the one with the lowest-numbered line or station
jack. This is the first line or station to be renumbered
in the string of lines or stations.
Press
[Enter].
The system displays the line or station number and prompts you to
enter the number of the last line or station in the block to be
changed, i.e., the one with the higest numbered jack.
Administering a New System 3-29