AT&T administration and, Installation And Maintenance Manual

Page: 223 / 404

DEFAULT SETTINGS The default operating conditions for a MERLIN II system
are the following:
Administration port. Station port 01 (intercom
number 10) is the only port for system administration
and initially the only attendant port.
CalI Report (SMDR). Both incoming and outgoing
calls are recorded; outgoing calls are recorded if they
have a duration of 1 minute for Feature Modules 1 and
2, or 40 seconds for Release 3.
Call Restrictions. None assigned.
Camp On Return Interval. Camped calls return after
1 minute.
Data Hunt Group. Data Hunt Groups are assigned
4-digit codes *870 through *875.
Dialing Timeout Interval. The dialing timeout
interval for rotary lines is 12 seconds.
Direct Inward System Access. DISA has no password
assigned.
Group CaI1 Distribution Groups. Group Call
Distribution groups are assigned 3-digit codes 870
through 875.
Group Page Groups. Group Page groups are assigned
3-digit codes 881 through 887.
Hold Disconnect Interval. The Hold Disconnect
Interval is set at 450 milliseconds (ms).
Line Pools. Line pools are assigned numbers 9, and
890 through 899.
Lines. Lines are assigned identifying numbers 01
through 32 for Feature Module 1 and assigned
identifying numbers 801 through 856 for Feature
Module 2 and Release 3.
Before Administering a System
3-15