Atal AWP-C, User Manual, Page: 70 / 82

AWP-TR1D
___________________________________________
Measured values:
Temperature and relative humidity from an external probe Digi/E.
Other humidity quantities are calculated from the measured
temperature and humidity.
Range, accuracy, and response time:
See manual for a particular Digi/E probe
Probe connection:
Digi/E probe is connected by 4-pin M8 ELKA 4008V connector.
Connection of pins is described at
Appendix 3 .
Maximum length of cable for Digi/E probe cannot exceed 15 m.
Resolution:
Temperature including dew point temperature: 0.1 °C
Relative humidity: 0.1 %RH
Recommended calibration interval:
1 year (according to used probe)
AWP-TR2D
___________________________________________
Measured values:
2x Temperature and relative humidity from external probes
Digi/E. Other humidity quantities are calculated from the
measured temperature and humidity.
Range, accuracy, and response time:
See manual for a particular Digi/E probe(s)
Probe connection:
Digi/E probe is connected by 4-pin M8 ELKA 4008V connector.
Connection of pins is described at
Appendix 3 .
Maximum length of cable for Digi/E probe cannot exceed 15 m.
Resolution:
Temperature including dew point temperature: 0.1 °C
Relative humidity: 0.1 %RH
Recommended calibration interval:
1 year (according to used probe)