Atal AWP-C, User Manual, Page: 50 / 82

2 sent from cache (DNS_ERR)
3 sent from cache (SOCK_ERR)
4 sent from cache (CONNECTION_ERR)
5 sent from cache (TRANSFER_ERR)
6 sent from cache (RESULT_NO)
7 sent from cache (RESULT_CONFIRM)
<Sn>
STR 8B length Serial number of the device (e.g. 20286614)
<Desc>
STR 64B length Device name at UTF-8
<Kind>
INT 0
– 11
Identification of device type:
1 AWP-T T
2 AWP-
T4P T
3 AWP-TR T+RH
4 AWP-
TR1D T+RH
5 AWP-
TR2D T+RH
6 AWP-
TR1D-
T3P T+RH
7 AWP-
TRP T+RH+P
8 AWP-
TRCP T+RH+P+CO2
9 AWP-C CO2
11 AWP-
T1P T
<AState>
AState status register. Description of the AState
register is described at table below.
<Reg>
INT 0
– 65535
Value of the AState register at the moment
when request was created
<Mask>
INT 0
– 65535
Mask of active bites at AState register
<NConf>
INT 0
– 255
Configuration number
<ConfID>
STR 15B length Configuration unique ID (X-YYYYYYYY-ZZZZ)
<Interval>
INT 0
– 65535
Sending interval in [sec]
<Time>
Date and time
<Now>
STR RFC3339 Time when message was transmitted to server
<Sample>
STR RFC3339 Time when message was sampled (it can be
older then <Now> due to sending message
from cache)
<IsValid>
INT 0, 1 Indication if time is valid (1 = RTC time is valid)
<Rssi>
RSSI (Received signal strength indication at
[dBm]). In case of value is not available is
returned -99. Expected range for WiFi is at
range -30 to -99dBm.
<Now>
INT < 0 RSSI value at the time when message is
transmitted to server
<Sample>
INT < 0 RSSI value at the time when message was
sampled
<LocalIP>
STR 64B length IP address of the device at local network
<Channels>
Measured values at channels. In case of
channel is not available at the device, channel
is not shown.
<Nr>
INT Channel number
<En>
INT 0, 1 Channel is enabled at settings (1 = enabled)
<Quant>
STR 32B len Name of the channel at UTF-8