Atal AWP-C, User Manual, Page: 10 / 82

Provisioning and first setup
•
Access point mode
– newly purchased device is set into access point
mode. Access point mode is signalised by symbol AP on the LCD display.
In case this symbol is not shown or there is symbol CL, please switch
device mode manually by the buttons according to chapter
Keyboard .
•
Connect by laptop or cell phone to access point
– enable WiFi on
laptop or cell phone and connect to the access point with name
WiFiSensor_xxxxxxxx. If cell phone is used, it is recommended to switch
off mobile data connection. Proper connection is signalised by following
symbol at LCD display.
•
Open web browser and insert address of device
–
http://192.168.3.1
•
Enter device settings
– go to the settings menu to start configuration
•
Insert SSID and password for WiFi network
– to be device connected
into WiFi network, it needs to be WiFi network credentials inserted. This
can be done at menu Network / WiFi client / Scan.