Asus P5M2 User Manual Download Page 68

Page: 68 / 189

ASUS P5M2 Series

-1

4.1

Managing and updating your BIOS

The following utilities allow you to manage and update the motherboard Basic

Input/Output System (BIOS) setup.

ASUS AFUDOS

(Updates the BIOS in DOS mode using a bootable floppy

disk.)

ASUS CrashFree BIOS 2

(Updates the BIOS using a bootable floppy disk or

the motherboard support CD when the BIOS file fails or gets corrupted.)

ASUS Update

(Updates the BIOS in Windows

environment.)

Refer to the corresponding sections for details on these utilities.

4.1.1 Creating a bootable floppy disk

To create a bootable floppy disk:

DOS environment

a. Insert a 1.44MB floppy disk into the drive.

b. At the DOS prompt, type

format A:/S

then press <Enter>.

Save a copy of the original motherboard BIOS file to a bootable floppy disk in

case you need to restore the BIOS in the future. Copy the original motherboard

BIOS using the ASUS Update or AFUDOS utilities.

Summary of Contents for P5M2






























































































































































































Search results

Summary of Contents for P5M2

Reviews:

Asus P5M2, User Manual, Page: 68 / 189

Search results

Summary of Contents for P5M2

Reviews: